Technical Guidelines for the Tag in the Crossing Notice

For physical and logical security you must:

• Be unique and be marked with the respective information.
• Be of a single application (they should not be removed since doing so could destroy them and make them unusable).
• Be exclusively designed to be used on the windshield of the vehicle.
• Have a chip with the serial number corresponding to the Tag ID (TID), which ensures a validation range of at least 7 meters.
• Have a receipt for the carrier from which the tag can be removed to be adhered to the inside of the vehicle's windshield whose measurements are 76 millimeters and 96 mm wide for the carrier's receipt and 26 mm high and 92 mm high. mm width for the tag.

• The carrier's receipt must show the logos of the Ministry of Finance and Public Credit and ANAM, as well as the legend "Carrier Receipt".
• Have the TID number and the number and Electronic Product Code (EPC) which must begin with the acronym ANAM, both numbers must be printed and represented by a QR.
• Have on the back the data of the unique serial number and the unique EPC number, which must begin with the acronym ANAM; both numbers must be printed and engraved at the factory represented by a QR, it must also contain the Agency logo and the word "ANAM-MEX" on the right side.
• On the back of the label must contain the word "ANAM-MEX" on both sides of the label, the Agency logo must be visible in the center of the label and have the EPC and TID QR codes.
• The USER Memory field will be locked by a password that will be protected by the agency.

Composition of unique and unrepeatable identification data.

The tags must be coded and blocked from their manufacture, the identification data must be unique and unrepeatable, for this the initial prefix "ANAM", the year of manufacture, the batch and the serial number.

For the Activation of the TAG.

Land transportation companies and owners of cargo vehicles must install the tag in each cargo vehicle and update the information in the corresponding system in order to register the tag number.

Recommendations to adhere to the TAG.

• Place it in a correct way.
• Perfectly clean the surface where the decal will be placed.
• The surface must be over 20 degrees Celsius so that the glue can adhere well.
• It must be adhered horizontally and in the recommended places.

• It is very important that the orientation of the tag is correct, since it is non-transferable and once the windshield is adhered, it should not be removed as it will be damaged and cannot be reused.
• Some of the areas that are recommended for the adhesion of the tag is the upper central area of the driver's side, since it is considered the most suitable for sticking the decal and it is where the tag performs best, however, you can also stick to the upper and lower corners of the windshield.
• If for any reason it is damaged, the carrier must acquire a new tag and must carry out the corresponding cancellation and update process.